MSE345
MUGEN COATING 3-Flute End Mill
●Our original MUGEN-COATING has been put on 3-flute end mill．
●Compared with 30°helix angle，it can be reduced cutting resistance．
Coating
MUGEN COATING
Material
Micro Grain Carbide
Cutting Possibility of Work Material Hardness
Up to 52HRC
Number of Flutes
3 Flutes
Helix Angle
45°
Applications
Side Milling
Applications
Slot Milling
Applications
Face Milling
Work Materials
Machinable indication by 
, 
,
| Carbon Steel | Alloy Steel | Prehardened Steel | Hardened Steel | Stainless Steel | Heat Resistant Alloy | Aluminum Alloy | Copper | Resin | Graphite | Hard Brittle Material | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ～ 52HRC |
～ 60HRC |
～ 65HRC |
～ 70HRC |
||||||||||
|
|
|
|
|
|
|
|
|
|||||
| Carbon Steel | |
Heat Resistant Alloy |
|
|
|---|---|---|---|---|
| Alloy Steel | |
Aluminum Alloy | |
|
| Prehardened Steel |
|
Copper | |
|
| Hardened Steel |
～ 52HRC |
|
Resin | |
| ～ 60HRC |
Graphite | |||
| ～ 65HRC |
Hard Brittle Material |
|||
| ～ 70HRC |
Hard Brittle Material |
|||
| Stainless Steel | |
|||
