MSX440

MUGEN COATING POWER Corner Radius End Mill

●It is very suitable for roughing on stainless steels and tough materials by unequal flute design．
●High performance for reducing roughing time．

  • Coating
    MUGEN COATING

  • Material
    Micro Grain Carbide

  • Cutting Possibility of Work Material Hardness
    Up to 40HRC

  • Number of Flutes
    4 Flutes

  • Helix Angle
    35°/38°

  • Applications
    Side Milling

  • Applications
    Slot Milling

  • Applications
    Face Milling

Description of icons

Work Materials

Machinable indication by ,
Carbon Steel Alloy Steel Prehardened Steel Hardened Steel Stainless Steel Heat Resistant Alloy Aluminum Alloy Copper Resin Graphite Hard Brittle Material
～
52HRC		 ～
60HRC		 ～
65HRC		 ～
70HRC

Carbon Steel Heat Resistant
Alloy
Alloy Steel Aluminum Alloy
Prehardened
Steel		 Copper
Hardened
Steel		 ～
52HRC		 Resin
～
60HRC		 Graphite
～
65HRC		 Hard Brittle
Material
～
70HRC		 Hard Brittle
Material
Stainless Steel

Leaflet

Line up

Unit [size: mm]

Code
No.		 (D)Dia. (l)Length of Cut (R)Corner Radius (γ)Neck Taper Angle (d)Shank Dia. (L)Overall Length Semi-standard
08-00144-00300 3 8 R0.2 12° 6 55
08-00144-00400 4 11 R0.2 12° 6 55
08-00144-00500 5 13 R0.2 12° 6 55
08-00144-00600 6 13 R0.3 － 6 55
▲ 08-00144-00700 7 19 R0.3 12° 8 60
▲ 08-00144-00800 8 19 R0.3 － 8 60
▲ 08-00144-00900 9 22 R0.3 12° 10 70
▲ 08-00144-01000 10 22 R0.3 － 10 70
▲ 08-00144-01100 11 26 R0.3 12° 12 80
▲ 08-00144-01200 12 26 R0.3 － 12 80
▲ 08-00144-01300 13 26 R0.7 12° 16 90
▲ 08-00144-01400 14 26 R0.7 12° 16 90
▲ 08-00144-01500 15 32 R1 12° 16 90
▲ 08-00144-01600 16 32 R1 － 16 90
▲ 08-00144-01800 18 32 R1 12° 20 105
▲ 08-00144-02000 20 38 R1 － 20 105

▲ means the sizes will no longer be on sale after the stock runs out.